or 4 payments of 
Description
Multi Hand Touch and Pen Control movable Smart Board Portable Interactive Whiteboard
Model : FT8G-L, long focus, projection ratio: 1.34
Laser Image Calibration Technology
Finger touch portable interactive whiteboards FT8 includes with two parts: emitter and signal receiver. Emitter is fixed on flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the signal receiver. Computer will figure out the position of the mouse by accurate calculating the reflected light position.
Specification
For Multi points, please noted the whiteboard software must support Windows OS Native Touch
|
FT8 Finger Touch Interactive Whiteboard Specifications |
|
|
Calibration |
Automatic(5 seconds) / Manual (4/15 points) |
|
Multi-touch |
100 points touch,Writing and erasing can be performed simultaneously |
|
Latency |
<30ms |
|
Filter |
Software auto-control, enhance stability. |
|
Minimum Active Size |
40 inch |
|
Max Active Size |
150inch( no sunshine room); |
|
Technology |
Laser Image Calibration Technology |
|
Positional Accuracy |
±1 Pixel (Resolution: 4096*4096) |
|
Aspect Ratio |
4:3;16:9;16:10 |
|
Projector ratio |
Long throw:1.34 installation distance:2.2m |
|
Number of lasers |
unit *3 |
|
Power |
5w |
|
Power of Laser Beam |
280mw*2 |
|
Power requirements |
3.3V/2A |
|
Signal refresh rate |
120fps |
|
Connect |
The sensor and computer are connected by USB Cable; Emitter and Sensor are wireless; Emitter just need power. |
|
Weight |
0.5kg |
|
OS Requirement |
Windows XP, Windows 7, Windows 8, Windows10; |
|
Software |
OwayFT; multi-board |
|
Certification |
CE, FCC |
|
Warranty |
2-year |
|
Package |
1. Sensor 2.Emitter 3. IR pen 4.USB cable (10m) 5. Remote 6.Power Adaptor 7. CD with software |
Installation
FT8 is small and easy to install. It doesn’t require professional technology to install.
Just install the laser emitter in the middle area above the whiteboard (or flat surface) and put the signal receiver on the projector.
Step by step guided video:
https://www.youtube.com/watch?v=8q8BpJj-1zs
Package & Accessories:
FT8 measurements : 35x22x13cm, gross weight 1.8KG
|
Item |
Quantity |
Image |
|
Square signal receiver |
1 |
|
|
Laser Emitter |
1 |
|
|
Electronic pen |
1 |
|
|
Power cable |
1 |
|
|
USB Cable:7 m square line |
1 |
|
|
CD |
1 |
|
|
Colloidal particles Allen wrench Hexagon screw Adjusting screw |
1 1 1 4 |
|
Product demo on You Tube:
https://www.youtube.com/watch?v=DnGizSDH0Hg
Reviews
There are no reviews yet.