Description
Features:
– It using 22AWG wire, the copper wire inside is very thick, can be resistant to current 2A, 300V voltage.
– I
An insulating layer over a wide range of temperatures, up to 80 degrees.
An insulating layer over a wide range of temperatures, up to 80 degrees.
– I
It is the common connection of thin copper wire cannot match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
It is the common connection of thin copper wire cannot match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
– I
Board Size: Approx. 39 x 16 x 7mm / 1.54 x 0.63 x 0.28 inch
Board Size: Approx. 39 x 16 x 7mm / 1.54 x 0.63 x 0.28 inch
– I
Cable Length: Approx. 70 cm / 27.56 inch
Cable Length: Approx. 70 cm / 27.56 inch
Connection Description:
– I
Red line connecting VCC (ramps of +)
– I
Connect the black wire GND (ramps of -)
– I
Green Line connection SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Package Included:
1 x 3D Printer Endstop Switch
Reviews
There are no reviews yet.