Description
Notice: It was upgraded with F4 V2.0 Flight Controller.
Will update product infomation asap.
11.29
Click here to buy Original Mobula7 Parts.
Specification:
Brand Name: Happymodel
Model: Mobula7 V2
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional)
– The diffirence of them are the package charger.
Basic Version: USB Charger
Standard Version: 6-way Charger
Weight: 25.9g (without battery) ;
Flying weight: 40g (with Original 250mah lipo battery x2 )
Max Take Off Weight: about 44g
Crazybee F3 Pro Flight Controller | Item Name: Crazybee F3 Pro FC MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.5-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Receiver ( Diffirent version having diffirent receiver) Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A BEC with LC filter Built-in voltage detection BLHELI_S pass-through Ready Heading LED Ready Firmware (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS (DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX (Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS |
Onboard 5A 4 In 1 ESC |
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
|
Onboard Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300M |
Onboard Frsky EU-LBT Version (External XM+ receiver) |
Operating Voltage Range: 3.7~10V
|
Onboard Flysky receiver Version | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Onboard DSM2 / DSMX receiver version | Serial bus receiver Protocol: DSM2/DSMX compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
SE0802 16000KV Motor | KV: 16000KV; Configu-ration: 9N12P
Support 1-2S Lipo; Stator Diamter: 8mm; Stator Length: 2mm
Shaft Diameter: Φ1.0; Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
|
Propeller | 40mm 4-blade Propeller ( 4 CW + 4 CCW) |
5.8G VTX AIO Camera |
Output power: 25mW;Input voltage: 3.3- 5.5V;Current consumption: 300mA(type) Camera resolution: 700TVL; Field of view: 120°; Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) Size: 13.9″12.0mm ( L*W ); Weight: 3g |
3.8v 250mAh Lipo Battery |
Connector: PH2.0 Continuous Discharge Rate: 30C; Instantaneous discharge rate: 60C Size: 55mmx12mmx7mm; Weight: 6.5g |
Features:
– 2S whoop more powerful and more flight time
– Betaflight support , multi flight mode: ACRO/AIR/ANGLE
– Smartaudio ready , change VTX bands, channels via OSD
DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
– Adjust the settings and the PID of the flight controller via OSD
– Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
– Flysky version support both AFHDS and AFHDS-2A protocol transmitter
– DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
– Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
– Full telemetry function ready
– Head lights ready
– Camera angle adjustable
– Real Bind and Fly version
– Buzzer Ready
Package Included:
Basic Version
1x Mobula7 V2 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver
Standard Version
1x Mobula7 V2 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery
1x Screwdriver
Reviews
There are no reviews yet.